|
PETG 美国伊士曼 AN014 注塑级
- 品牌：PETG 美国伊士曼
- 货号：321
- 价格： ￥15/千克
- 发布日期： 2024-01-20
- 更新日期： 2024-09-29
产品详请
| 品牌 | PETG 美国伊士曼 |
| 货号 | 321 |
| 用途 | 填充物:阻燃 医用 注塑 |
| 牌号 | AN014 |
| 型号 | AN014 |
| 品名 | PCTG |
| 外形尺寸 | 0.1 |
| 生产企业 | 123 |
| 是否进口 | 否 |
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
-
Bus shelters
-
Poster glazing
-
Machine guards
-
Medical appliance packaging
-
Displays & signs for external use
-
Refrigerators and cold storeroom equipment
-
Bicycle safety helmets
-
Food containers
-
Lenticular lenses
-
Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
物理性能
额定值 (公制)
额定值 (英制)
测试方法
密度
1.27 g/cc
0.0459 lb/in3
ASTM D1595
机械性能
额定值 (公制)
额定值 (英制)
测试方法
洛氏硬度（R 级）
105
105
ASTM D785
抗张强度(断裂)
50.0 MPa
7250 psi
DIN 53455
伸长率 (断裂)
54 %
54 %
DIN 53466
拉伸模量
2.20 GPa
319 ksi
DIN 53455
弯曲强度
70.0 MPa
10200 psi
DIN 53452
弯曲模量
2.075 GPa
301.0 ksi
DIN 53452
悬壁梁缺口冲击强度
11.5 kJ/m2
5.47 ft-lb/in2
ISO 180
简支梁无缺口冲击强度
NB
NB
DIN 53453
简支梁缺口冲击强度
1.00 J/cm2
4.76 ft-lb/in2
DIN 53453
电气性能
额定值 (公制)
额定值 (英制)
测试方法
体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D257
表面电阻
>= 1.00e+16 ohm
>= 1.00e+16 ohm
ASTM D257
介电常数
2.6
@Frequency 100 Hz
2.6
@Frequency 100 Hz
介电强度
16.0 kV/mm
406 kV/in
D149
耗散因数
0.010
@Frequency 50 Hz
0.010
@Frequency 50 Hz
IEC 250
热性能
额定值 (公制)
额定值 (英制)
测试方法
线性热膨胀系数
68.0 μm/m-°C
@Temperature 20.0 °C
37.8 μin/in-°F
@Temperature 68.0 °F
DIN 53752
比热容
1.10 J/g-°C
0.263 BTU/lb-°F
ASTM D2766
导热系数
0.200 W/m-K
1.39 BTU-in/hr-ft2-°F
DIN 52612
工作温度, Air
70.0 °C
158 °F
载荷下热变形温度(0.46 MPa)
68.0 °C
154 °F
DIN 53461
载荷下热变形温度(1.8 MPa)
72.0 °C
162 °F
DIN 53461
维卡软化温度
82.0 °C
180 °F
DIN 53460
分解温度
>= 280 °C
>= 536 °F
光学性能
额定值 (公制)
额定值 (英制)
测试方法
折射率
1.57
1.57
DIN 53491
雾度
<= 1.0 %
<= 1.0 %
ASTM D1003
Transmission, Visible
88 %
88 %
DIN 5036-3
加工性能
额定值 (公制)
额定值 (英制)
测试方法
加工温度
120 - 160 °C
248 - 320 °F
Sheet Forming
Polycasa PETG
Polyethylene Terephthalate (PET)
Polycasa
产品说明：
QUINN PETG has good optical properties and a brilliant surface. The PETG range of sheets are easy to fabricate, to vacuum form, and show exceptional low temperature performance. Important benefits of QUINN PETG are its very good chemical resistance and very high impact properties. QUINN PETG meets all current food contact legislation and can be used in contact with unwrapped food. QUINN PETG also combines the following excellent properties: easy to vacuum form, needs no predrying, exceptional low temperature performance, low water absorption, ease to recycle, and very high impact properties
- Bus shelters
- Poster glazing
- Machine guards
- Medical appliance packaging
- Displays & signs for external use
- Refrigerators and cold storeroom equipment
- Bicycle safety helmets
- Food containers
- Lenticular lenses
- Graphic Arts Lighting controllers for hazardous areas<./li>
Quinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.
物性信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.27 g/cc | 0.0459 lb/in3 | ASTM D1595 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（R 级） | 105 | 105 | ASTM D785 |
| 抗张强度(断裂) | 50.0 MPa | 7250 psi | DIN 53455 |
| 伸长率 (断裂) | 54 % | 54 % | DIN 53466 |
| 拉伸模量 | 2.20 GPa | 319 ksi | DIN 53455 |
| 弯曲强度 | 70.0 MPa | 10200 psi | DIN 53452 |
| 弯曲模量 | 2.075 GPa | 301.0 ksi | DIN 53452 |
| 悬壁梁缺口冲击强度 | 11.5 kJ/m2 | 5.47 ft-lb/in2 | ISO 180 |
| 简支梁无缺口冲击强度 | NB | NB | DIN 53453 |
| 简支梁缺口冲击强度 | 1.00 J/cm2 | 4.76 ft-lb/in2 | DIN 53453 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | ASTM D257 |
| 表面电阻 | >= 1.00e+16 ohm | >= 1.00e+16 ohm | ASTM D257 |
| 介电常数 |
2.6
@Frequency 100 Hz
|
2.6
@Frequency 100 Hz
|
|
| 介电强度 | 16.0 kV/mm | 406 kV/in | D149 |
| 耗散因数 |
0.010
@Frequency 50 Hz
|
0.010
@Frequency 50 Hz
|
IEC 250 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线性热膨胀系数 |
68.0 μm/m-°C
@Temperature 20.0 °C
|
37.8 μin/in-°F
@Temperature 68.0 °F
|
DIN 53752 |
| 比热容 | 1.10 J/g-°C | 0.263 BTU/lb-°F | ASTM D2766 |
| 导热系数 | 0.200 W/m-K | 1.39 BTU-in/hr-ft2-°F | DIN 52612 |
| 工作温度, Air | 70.0 °C | 158 °F | |
| 载荷下热变形温度(0.46 MPa) | 68.0 °C | 154 °F | DIN 53461 |
| 载荷下热变形温度(1.8 MPa) | 72.0 °C | 162 °F | DIN 53461 |
| 维卡软化温度 | 82.0 °C | 180 °F | DIN 53460 |
| 分解温度 | >= 280 °C | >= 536 °F |
| 光学性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 折射率 | 1.57 | 1.57 | DIN 53491 |
| 雾度 | <= 1.0 % | <= 1.0 % | ASTM D1003 |
| Transmission, Visible | 88 % | 88 % | DIN 5036-3 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | 120 - 160 °C | 248 - 320 °F | Sheet Forming |
|
|
|
||
|
|
|
||
